Ride more with less fuel
Proper bike maintenance is what you need to do. This will not only help keep you (and others) safe on the road, but also reduce your monthly petrol bills.
DO’S of saving petrol:
- Driving at a constant speed is a tried and true way to save fuel. Increasing and decreasing the speed suddenly puts more pressure on the engine and the tank empties in an instant.
- It is important to maintain proper tire pressure and adjust the drive chain tension properly. Driving a zigzag at high speeds can damage these elements and consume more fuel.
- Always check that your engine is tuned and serviced by a company authorized garage.
- Always maintain a low emission level.
DON’TS of fuel consumption:
- Do not press the clutch lever while you are riding.
- Do not run the engine in low gear for too long.
- Do not park yours in direct sunlight as this will evaporate the fuel.
- Don’t depress the brake pedal while driving.
- Do not increase engine RPM by traffic stop. If you have to wait more than 30 seconds, turn off the engine.
- Do not cover the front of the air filter assembly.
- Do not cover the front and side of the engine as this may restrict air flow to the engine fins required for air cooling. And high temperature can lead to additional fuel consumption.
Tips/Suggestions to maintain low emission levels:
- Keep your spark plug clean and secure the designated space between the electrodes.
- Have an eye to the air filter whether they are clean or not.
- Control the carburetor in any workshop approved by the company.
- Do not refill with engine oil and follow the replacement schedule.
- Never use adulterated petrol.
- You must obtain an emission level certificate once every 3 months at any authorized emission testing center.
How To Increase The Mileage Of Your Two-Wheeler
Riding a bike or scooter for your daily commute saves a lot of time. Also, if you are traveling long distances every day, the main question on your mind is how to increase your bike mileage. It is very easy to maintain your bike properly, drive without putting too much pressure on the engine and consume less fuel. Not only is it economical, it also goes a long way in keeping you safe on busy Indian roads.
Proper maintenance and service:
Proper maintenance and timely service are of prior importance in maintaining a good level of performance of your two-wheeler. It also improves the fuel efficiency of your vehicle as the gearbox and engine need lubrication to operate without any pressure. It is recommended that you get your scooter serviced as specified in your Motorcycle Maintenance Manual. With oil changes, optimized coolant oil levels and chain lubrication, your vehicle will be optimized to work at its best. If you suspect oil is leaking from your engine, fix it as soon as possible.
Maintaining Proper Tire Pressure:
A regular tip followed to keep the tire pressure at the recommended level is to increase the mileage of your scooter or bike. It is the rider’s duty to ensure that the tires are raised to the pressure specified by the vehicle manufacturer. In general, tires are marked with markings for proper tire pressure. If you want to put extra weight on your vehicle, check out the bike manufacturer’s handbook for proper guidance. Maintaining proper tire pressure will not only increase the life of your two-wheeler tires but also improve the overall performance and fuel efficiency of your bike.
Avoid running the engine unnecessarily:
Running the engine when your bike is parked or not in use will waste fuel. When the wait exceeds 10 seconds, it is important to skip the exercise and turn off the ignition. Now every two-wheeler should have no problem closing the engine with the self-start button. Also, these days engines do not need to be warmed up in winter and you can drive your engine smoothly without turning.
Avoid Clutch Override:
Excessive use of the clutch can be avoided as much as possible and used only when needed.Most two-wheelers override the clutch, especially when not in use. It can consume a lot of fuel when not needed. In bumper to bumper traffic situations, clutch overriding can be easily prevented by using the appropriate gear. It can also help you extend the life of the clutch plate and save significant fuel.
Clever gearing:
To avoid engine stress on your vehicle, you need to shift into a higher gear faster. This can help your bike engine to run smoothly and will also greatly increase the mileage of your bike or scooter. Also, keep in mind that the higher the speed of your vehicle, the higher the fuel consumption. 150cc motorcycle in third-gear at 55-60 km / h. Exceeding that speed will put pressure on your engine and cause more fuel loss. Speeding is not only dangerous to your life, it also reduces the fuel efficiency of your vehicle.
Use quality fuel:
Using better quality, more refined oil will extend your engine life and give you more fuel efficiency. Although these fuels are a bit expensive, it is definitely worth spending for the purposes it produces.
Avoid traffic:
Well, this may seem unscientific because you literally can’t avoid traffic all the time. But traveling in traffic wastes a lot of energy, which can be avoided in some ways. First, if you are traveling to a specific destination on a daily basis, find a route that has less traffic. Also, there are times when the traffic is at its maximum. If you start early, you will not get stuck in traffic and your vehicle will become difficult. Accelerating traffic can adversely affect your vehicle’s fuel efficiency and it is best to avoid traffic as much as possible. You can use GPS or radio traffic status to know the traffic conditions at specific times.
Use Google Maps / GPS:
Using GPS you can choose the shortest and best route with the least traffic. While some people may wonder how to use a GPS device while riding, there are many gadgets available these days that inform you about the route options available without interrupting your journey. You can use Bluetooth headphones to receive audio instructions as you travel.
Refuel your vehicle in the morning:
When the ambient temperature is cold, the fuel is dense. As the afternoon temperature rises, the fuel begins to expand. This way, it is a good idea to refuel your vehicle in the morning.
Ride smart
Most importantly, ride wisely. Sudden acceleration or braking can adversely affect your vehicle performance. This practice can also lead to a lot of energy wastage. Riding at a constant speed and gently pressing the bike will not only extend the life of your vehicle but also help you save significant fuel.
Fuel savings have always been a big concern among bike and scooter owners in India, and the above tips will definitely be a big savior in driving your vehicles at the optimum level and getting the most out of fuel.
